Now it's available for the Windows, Linux and macOS. Other versions will be released soon.
What is new:
v1.9.4 BETA2 (21 jul 2018):
- fixed bugs with shortcuts.
- iOS: user files are now available through the Files app;
- iOS: partial USB/Bluetooth keyboard support (no key release, no Home/End, no F1/F2/...);
- iOS: improved iPhone X display support;
- sound engine optimization;
- indicating the modules whose controllers are tied to the MIDI;
- additional slider for scrolling the controllers when there is not enough space on the screen;
- spectrogram has been added to the to the spectrum analyzer;
- detailed settings of the spectrum analyzer are now available through the main menu -> Preferences -> Modules; also you can find it in sunvox_config.ini;
- Amplifier: new controller "Gain" for high amplification (x100, x1000 and higher);
- Analog Generator: new option "True zero attack/release" - turn it on when you need a very fast (instantaneous) zero attack or/and release;
- Analog Generator: new waveforms: "noise with spline interpolation (sampler)", "white noise", "pink noise", "red noise", "blue noise", "violet noise", "grey noise";
- Compressor: new mode "peak zero latency" for compression/limiting without delay; modes "peak" and "RMS" operate with a delay of 1 ms;
- Distortion: new types: "foldback2", "foldback3", "overflow";
- GPIO: max number of pins is increased to 256;
- LFO: new waveform "random interpolated" (same as random (5), but with a smoother transition between the signal levels);
- DrumSynth: three additional panning controllers for the bass, hihat and snare;
- Kicker and DrumSynth: panning controller can now be set locally (for each note separately);
- Kicker: "Boost" (old name - "Vol.addition") controller works again after it was accidentally broken in SunVox 1.6 :)
- MultiCtl: new controllers "Response" and "Sample rate" to smoothly change the output value; response=1000 - immediate change; response<1000 - smooth change; optimal sample rate = 150Hz, please avoid higher values without the urgent need;
- Timeline: new function "set restart position" - use it to change the position which the project should restart from after the project end;
- pattern effect 03 (slide to note): default speed value (XXYY) is 256 (100 in hex);
- new pattern effect 24: take a note from line XXYY on the same track; if the note to the left of the effect is specified, it will be used as the transposition value (relative to C5: c5 - one semitone higher, C4 - one octave lower, etc.); if the module number is missing, then the module number from line XXYY will be used;
- new pattern effect 25: take a random note from the range of lines XX..YY (inclusive) on the same track;
- new pattern effect 26: take a note from track XXYY on the same line;
- new pattern effect 27: take a random note from the range of tracks XX..YY (inclusive) on the same line;
- new pattern effect 28: take a note from line XXYY on track 0;
- new pattern effect 29: take a random note from the range of lines XX..YY (inclusive) on track 0; see example "pat effect 29 random note from trk0";
- module remapping: "pattern" button has been added;
- dialog window shortcuts: Y or ENTER = first button on the left; N = second button; ESC = cancel; 1...9 = buttons from left to right;
- if you enter the file name "exporttest" when exporting to WAV, the SunVox engine speed test will be performed (without saving to disk);
- new keyboard shortcut: CTRL + SHIFT + N - new project;
- new keyboard shortcut: SHIFT + F10 - play from the pattern cursor;
- new instruments: keyboard/NR SuperSaw (lo-fi), analog11, analog12, pads/analog_distorted2, wind/NR Sax;
- new instruments and effects from other users (see the instruments and effects folders);
- new simple examples: idm;
- sunvox_config.ini: denorm 0/1 - disable/enable denormal numbers; DON'T use this if you don't know what it is :)
- various small changes and improvements;
- bug fixes: unpredictable clicks in Vibrato and Vocal Filter, etc.