send midi program change from a pattern

Post Reply
User avatar
offthesky
Posts: 85
Joined: Sat Mar 26, 2011 9:55 pm
Location: Denver, Colorado
Contact:

send midi program change from a pattern

Post by offthesky »

this way, when using sunvox to control external hardware, vstis or apps like apematrix - we could do things like have keys on our midi keyboard fire off the external presets (via having the pcm in a pattern in a metamodule, controlled via a note to play the mm's pattern).

or is this already possible? i searched the manual, changelog, forum and youtube but found the only way to do this is manually from within a module's properties panel.
User avatar
tkna
Posts: 16
Joined: Thu Mar 24, 2022 1:15 pm
Location: Tokyo, Japan

Re: send midi program change from a pattern

Post by tkna »

Perhaps I'm misunderstanding and don't even understand the basic usage, but is that different from setting the CC column to 80?
User avatar
offthesky
Posts: 85
Joined: Sat Mar 26, 2011 9:55 pm
Location: Denver, Colorado
Contact:

Re: send midi program change from a pattern

Post by offthesky »

from what i'm reading in the manual, cc 80 = midi cc 00... so only midi cc out from patterns
User avatar
tkna
Posts: 16
Joined: Thu Mar 24, 2022 1:15 pm
Location: Tokyo, Japan

Re: send midi program change from a pattern

Post by tkna »

Sorry if I misunderstood something.

I did some research. I see that you have to send a control change and then a program change to make it effective.
https://midi.org/specifications/midi1-s ... ion-96-1-4

Image

It seems that when I send 80 and A0 on SunVox, the program change (C0-CF?) is not sent.
Image
Image
Last edited by tkna on Thu Jun 09, 2022 1:16 am, edited 1 time in total.
User avatar
offthesky
Posts: 85
Joined: Sat Mar 26, 2011 9:55 pm
Location: Denver, Colorado
Contact:

Re: send midi program change from a pattern

Post by offthesky »

hmm i'm experiencing the same as well. perhaps it's worth mentioning in the forum bugs section...
User avatar
NightRadio
Site Admin
Posts: 3941
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: send midi program change from a pattern

Post by NightRadio »

Unfortunately you can't send the following MIDI events from the pattern:
polyphonic key pressure;
program change; (you can set program+bank for the module, but you can't automate these parameters)
channel pressure;
pitch wheel.

Support for these commands will be added in future updates.
Post Reply