Effects for SUNVOX 2.0

User avatar
AutumnCheney
Posts: 503
Joined: Sun Dec 29, 2019 8:16 am
Location: tahlequah, ok, usa
Contact:

Re: Effects for SUNVOX 2.0

Post by AutumnCheney »

Attachments
AutumnC Reverb Pro.sunsynth
(7.92 KiB) Downloaded 194 times
my website: https://acheney.xyz

it features my music, sunvox content, and social media links!
User avatar
Logickin λ
Posts: 165
Joined: Sat Sep 08, 2018 8:31 pm
Contact:

Re: Effects for SUNVOX 2.0

Post by Logickin λ »

I was messing around the op block in low frequency,
and just realized that we can actually reduce a stereo chorus into only 2 modules:
Modulator and LFO in stereo Sine:
Logickin Smallest Stereo Chorus.sunsynth
(2.35 KiB) Downloaded 175 times

Then I play with this methods and upgrade my old vibrato based chorus, and introducing: C->Horus
The Second Order, Experimental, Phase Modulator based Chorus.
The chorus gives you:
- 2 stages of modulators gives you 2 levels of chorus effect
- A flexible feedback loop which you can also make it act like an echo or flanger effects
- A Destructor effect which takes the feedback signal into the LFO used for the chorus, making some "distortion" effects
- Triangle wave option for the chorus to lower CPU usage

Alert!
The module can be unstable due to the feedback loop in high volume, be aware of the feedback and input level.

Here is the module:
Logickin C-Horus.sunsynth
(19.25 KiB) Downloaded 165 times
User avatar
monoben
Posts: 147
Joined: Wed Feb 26, 2014 11:09 am

Re: Effects for SUNVOX 2.0

Post by monoben »

https://warmplace.ru/forum/viewtopic.php?f=11&t=5785

I made a module called ProSubQ.

It removes often unwanted ultra low sub frequency's.

It can be tricky to work with such tight margins when dealing with sub frequency's, so using a bunch of stacked ProFilters and some MultiCtrl's I made this thing anyone can quickly get good results form.
User avatar
kevintherobloxnoob
Posts: 53
Joined: Sun Mar 15, 2020 9:14 am
Location: Atlanta, GA
Contact:

Re: Effects for SUNVOX 2.0

Post by kevintherobloxnoob »

Using SunVox for like a year and still a beginner. :)

My SC:https://soundcloud.com/kevintherobloxnoob
My Audius:https://audius.co/kevintheroblox1
User avatar
Keres
Posts: 466
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: Effects for SUNVOX 2.0

Post by Keres »

Frequency dependent delay. loads of uses... mainly to make things sound all dreamy..............
i designed it to be used with units set to 0 (sec/16384) with little or no feedback as sort of an enhancer as well.

have fun!
Attachments
Keres_FreqDelay.sunsynth
(43.65 KiB) Downloaded 176 times
philipbergwerf
Posts: 174
Joined: Sat Mar 17, 2018 4:23 pm

Re: Effects for SUNVOX 2.0

Post by philipbergwerf »

A while ago I tried to make a note off trigger module and after some forum questions Queries came up with a solution. It is a very usefull module for triggering the note on key release and I think it should be implemented in the new sunvox!
Attachments
Queries Note Off Trigger.sunsynth
(27.2 KiB) Downloaded 186 times
User avatar
queries
Posts: 316
Joined: Tue May 10, 2016 9:51 pm

Re: Effects for SUNVOX 2.0

Post by queries »

Is this thread OK to post curves?

Here is a multictl curve that has a "detent" region in the middle.

If you have a MIDI controller with knobs that have detents, and they sometimes give 63 or 65 instead of 64 for the center value, this curve will make sure that the exact middle (16384) is emitted from the multictl.
Attachments
detent.multictl.curve16bit.zip
(570 Bytes) Downloaded 157 times
User avatar
Keres
Posts: 466
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: Effects for SUNVOX 2.0

Post by Keres »

Piggy-Back Delay

this is for composers who need more notes... i guess. its called the piggy-back because the vocal teacher said it sounded like pig noises coming from my room. you have 3 channels that are configurable, each is a.... i donno just play with it. it uses tics so remember to set the BPM to the same as your tune.

have fun!
Attachments
Keres_PiggyBack.sunsynth
(14.62 KiB) Downloaded 166 times
User avatar
cube48
Posts: 114
Joined: Tue Jun 21, 2011 10:33 am

Re: Effects for SUNVOX 2.0

Post by cube48 »

ShimmerClassic [REVERB]

A classic shimmer reverb (with fixed +1 octave pitch shifter).
Attachments
cube48 ShimmerClassic.sunsynth
(16.72 KiB) Downloaded 175 times
User avatar
kevintherobloxnoob
Posts: 53
Joined: Sun Mar 15, 2020 9:14 am
Location: Atlanta, GA
Contact:

Re: Effects for SUNVOX 2.0

Post by kevintherobloxnoob »

New module I made a month ago: The Lo-Fi Master. This module was actually based off 21music's Lo-Fi Master module but with some improvements. (21's Lo-Fi Master: https://cdn.discordapp.com/attachments/ ... r.sunsynth)
ktrn lo-fi master.png
ktrn lo-fi master.png (26.27 KiB) Viewed 3596 times
21's Lo-Fi Master (KTRN Version).sunsynth
(21.69 KiB) Downloaded 171 times
I also wanna think 21music for the original module! :good:
Using SunVox for like a year and still a beginner. :)

My SC:https://soundcloud.com/kevintherobloxnoob
My Audius:https://audius.co/kevintheroblox1
User avatar
synx
Posts: 11
Joined: Fri Apr 02, 2021 3:28 am
Location: Florida, US

Re: Effects for SUNVOX 2.0

Post by synx »

Here are a few stereo effects I threw together.

Haas X is a classic stereo offset delay (Haas effect) that incorporates all-pass filters into the signal chain to give users options to mitigate phasing when mixed back to mono.

Stereo Magix is simply a control for L and R channel all pass filters which have inverse Q as "intensity" control. Modulating the All-pass on the Stereo Magix module can give some fun stereo chorus effects.

Both modules offer a width control as the last control to check mono mix if set to 0.
Attachments
SYNX Haas_X.sunsynth
(10.76 KiB) Downloaded 135 times
SYNX Stereo_Magix.sunsynth
(10.49 KiB) Downloaded 129 times
User avatar
synx
Posts: 11
Joined: Fri Apr 02, 2021 3:28 am
Location: Florida, US

Re: Effects for SUNVOX 2.0

Post by synx »

Here are some unique/strange reverb effects. They are opposites.

MeltyVerb's tail pitches down over time.
BoingyVerb's tail pitches up over time.
Both are great for making horror soundtracks.
Attachments
SYNX BoingyVerb.sunsynth
(13.87 KiB) Downloaded 144 times
SYNX MeltyVerb.sunsynth
(13.87 KiB) Downloaded 137 times
fuzion_mixer
Posts: 35
Joined: Fri Nov 30, 2018 11:15 am

Re: Effects for SUNVOX 2.0

Post by fuzion_mixer »

The new Granulator module has been posted here!
https://warmplace.ru/forum/viewtopic.php?f=11&t=5948
User avatar
SawZer
Posts: 273
Joined: Sun Jun 19, 2011 2:26 am
Location: Texas
Contact:

Re: Effects for SUNVOX 2.0

Post by SawZer »

Fuzz 2 Oct - A distortion effect metamodule meant to emulate transistor style distortion. Good for guitars, leads, basses, and anything that needs a little extra "dirt".
Attachments
SawZer Fuzz 2 Oct.sunsynth
(15.71 KiB) Downloaded 141 times
User avatar
SawZer
Posts: 273
Joined: Sun Jun 19, 2011 2:26 am
Location: Texas
Contact:

Re: Effects for SUNVOX 2.0

Post by SawZer »

Harmonic Boost is a filter effect that is meant to boost the volume of a specific harmonic. It has a parameter called "Base Frequency", which is intended to be modulated by a pitch2ctl module*. The parameter called "Harmonic" was intended to be a direct multiplier of the "Base Frequency" parameter value, but the Amplifier module Gain parameter doesn't seem to do integer multiplication :(

*Or you could just set it, or modulate in pattern editor
Attachments
SawZer Harmonic Boost.sunsynth
(7.45 KiB) Downloaded 147 times
Post Reply