Effects for SUNVOX 2.0
- AutumnCheney
- Posts: 507
- Joined: Sun Dec 29, 2019 8:16 am
- Location: tahlequah, ok, usa
- Contact:
Re: Effects for SUNVOX 2.0
- Attachments
-
- AutumnC Reverb Pro.sunsynth
- (7.92 KiB) Downloaded 197 times
- Logickin λ
- Posts: 172
- Joined: Sat Sep 08, 2018 8:31 pm
- Contact:
Re: Effects for SUNVOX 2.0
I was messing around the op block in low frequency,
and just realized that we can actually reduce a stereo chorus into only 2 modules:
Modulator and LFO in stereo Sine:
Then I play with this methods and upgrade my old vibrato based chorus, and introducing: C->Horus
The Second Order, Experimental, Phase Modulator based Chorus.
The chorus gives you:
- 2 stages of modulators gives you 2 levels of chorus effect
- A flexible feedback loop which you can also make it act like an echo or flanger effects
- A Destructor effect which takes the feedback signal into the LFO used for the chorus, making some "distortion" effects
- Triangle wave option for the chorus to lower CPU usage
Alert!
The module can be unstable due to the feedback loop in high volume, be aware of the feedback and input level.
Here is the module:
and just realized that we can actually reduce a stereo chorus into only 2 modules:
Modulator and LFO in stereo Sine:
Then I play with this methods and upgrade my old vibrato based chorus, and introducing: C->Horus
The Second Order, Experimental, Phase Modulator based Chorus.
The chorus gives you:
- 2 stages of modulators gives you 2 levels of chorus effect
- A flexible feedback loop which you can also make it act like an echo or flanger effects
- A Destructor effect which takes the feedback signal into the LFO used for the chorus, making some "distortion" effects
- Triangle wave option for the chorus to lower CPU usage
Alert!
The module can be unstable due to the feedback loop in high volume, be aware of the feedback and input level.
Here is the module:
Re: Effects for SUNVOX 2.0
https://warmplace.ru/forum/viewtopic.php?f=11&t=5785
I made a module called ProSubQ.
It removes often unwanted ultra low sub frequency's.
It can be tricky to work with such tight margins when dealing with sub frequency's, so using a bunch of stacked ProFilters and some MultiCtrl's I made this thing anyone can quickly get good results form.
I made a module called ProSubQ.
It removes often unwanted ultra low sub frequency's.
It can be tricky to work with such tight margins when dealing with sub frequency's, so using a bunch of stacked ProFilters and some MultiCtrl's I made this thing anyone can quickly get good results form.
- kevintherobloxnoob
- Posts: 53
- Joined: Sun Mar 15, 2020 9:14 am
- Location: Atlanta, GA
- Contact:
Re: Effects for SUNVOX 2.0
check out the de-esser I made: https://www.warmplace.ru/forum/viewtopi ... =11&t=5781
Using SunVox for like a year and still a beginner.
My SC:https://soundcloud.com/kevintherobloxnoob
My Audius:https://audius.co/kevintheroblox1
My SC:https://soundcloud.com/kevintherobloxnoob
My Audius:https://audius.co/kevintheroblox1
Re: Effects for SUNVOX 2.0
Frequency dependent delay. loads of uses... mainly to make things sound all dreamy..............
i designed it to be used with units set to 0 (sec/16384) with little or no feedback as sort of an enhancer as well.
have fun!
i designed it to be used with units set to 0 (sec/16384) with little or no feedback as sort of an enhancer as well.
have fun!
- Attachments
-
- Keres_FreqDelay.sunsynth
- (43.65 KiB) Downloaded 177 times
-
- Posts: 174
- Joined: Sat Mar 17, 2018 4:23 pm
Re: Effects for SUNVOX 2.0
A while ago I tried to make a note off trigger module and after some forum questions Queries came up with a solution. It is a very usefull module for triggering the note on key release and I think it should be implemented in the new sunvox!
- Attachments
-
- Queries Note Off Trigger.sunsynth
- (27.2 KiB) Downloaded 190 times
Re: Effects for SUNVOX 2.0
Is this thread OK to post curves?
Here is a multictl curve that has a "detent" region in the middle.
If you have a MIDI controller with knobs that have detents, and they sometimes give 63 or 65 instead of 64 for the center value, this curve will make sure that the exact middle (16384) is emitted from the multictl.
Here is a multictl curve that has a "detent" region in the middle.
If you have a MIDI controller with knobs that have detents, and they sometimes give 63 or 65 instead of 64 for the center value, this curve will make sure that the exact middle (16384) is emitted from the multictl.
- Attachments
-
- detent.multictl.curve16bit.zip
- (570 Bytes) Downloaded 160 times
Re: Effects for SUNVOX 2.0
Piggy-Back Delay
this is for composers who need more notes... i guess. its called the piggy-back because the vocal teacher said it sounded like pig noises coming from my room. you have 3 channels that are configurable, each is a.... i donno just play with it. it uses tics so remember to set the BPM to the same as your tune.
have fun!
this is for composers who need more notes... i guess. its called the piggy-back because the vocal teacher said it sounded like pig noises coming from my room. you have 3 channels that are configurable, each is a.... i donno just play with it. it uses tics so remember to set the BPM to the same as your tune.
have fun!
- Attachments
-
- Keres_PiggyBack.sunsynth
- (14.62 KiB) Downloaded 168 times
Re: Effects for SUNVOX 2.0
ShimmerClassic [REVERB]
A classic shimmer reverb (with fixed +1 octave pitch shifter).
A classic shimmer reverb (with fixed +1 octave pitch shifter).
- Attachments
-
- cube48 ShimmerClassic.sunsynth
- (16.72 KiB) Downloaded 178 times
- kevintherobloxnoob
- Posts: 53
- Joined: Sun Mar 15, 2020 9:14 am
- Location: Atlanta, GA
- Contact:
Re: Effects for SUNVOX 2.0
New module I made a month ago: The Lo-Fi Master. This module was actually based off 21music's Lo-Fi Master module but with some improvements. (21's Lo-Fi Master: https://cdn.discordapp.com/attachments/ ... r.sunsynth)
I also wanna think 21music for the original module!
Using SunVox for like a year and still a beginner.
My SC:https://soundcloud.com/kevintherobloxnoob
My Audius:https://audius.co/kevintheroblox1
My SC:https://soundcloud.com/kevintherobloxnoob
My Audius:https://audius.co/kevintheroblox1
Re: Effects for SUNVOX 2.0
Here are a few stereo effects I threw together.
Haas X is a classic stereo offset delay (Haas effect) that incorporates all-pass filters into the signal chain to give users options to mitigate phasing when mixed back to mono.
Stereo Magix is simply a control for L and R channel all pass filters which have inverse Q as "intensity" control. Modulating the All-pass on the Stereo Magix module can give some fun stereo chorus effects.
Both modules offer a width control as the last control to check mono mix if set to 0.
Haas X is a classic stereo offset delay (Haas effect) that incorporates all-pass filters into the signal chain to give users options to mitigate phasing when mixed back to mono.
Stereo Magix is simply a control for L and R channel all pass filters which have inverse Q as "intensity" control. Modulating the All-pass on the Stereo Magix module can give some fun stereo chorus effects.
Both modules offer a width control as the last control to check mono mix if set to 0.
- Attachments
-
- SYNX Haas_X.sunsynth
- (10.76 KiB) Downloaded 135 times
-
- SYNX Stereo_Magix.sunsynth
- (10.49 KiB) Downloaded 131 times
Re: Effects for SUNVOX 2.0
Here are some unique/strange reverb effects. They are opposites.
MeltyVerb's tail pitches down over time.
BoingyVerb's tail pitches up over time.
Both are great for making horror soundtracks.
MeltyVerb's tail pitches down over time.
BoingyVerb's tail pitches up over time.
Both are great for making horror soundtracks.
- Attachments
-
- SYNX BoingyVerb.sunsynth
- (13.87 KiB) Downloaded 145 times
-
- SYNX MeltyVerb.sunsynth
- (13.87 KiB) Downloaded 137 times
-
- Posts: 35
- Joined: Fri Nov 30, 2018 11:15 am
Re: Effects for SUNVOX 2.0
The new Granulator module has been posted here!
https://warmplace.ru/forum/viewtopic.php?f=11&t=5948
https://warmplace.ru/forum/viewtopic.php?f=11&t=5948
Re: Effects for SUNVOX 2.0
Fuzz 2 Oct - A distortion effect metamodule meant to emulate transistor style distortion. Good for guitars, leads, basses, and anything that needs a little extra "dirt".
- Attachments
-
- SawZer Fuzz 2 Oct.sunsynth
- (15.71 KiB) Downloaded 142 times
You can find me on
Bandcamp: https://sawzer.bandcamp.com/
Soundcloud: https://soundcloud.com/sawzer
Spotify: https://open.spotify.com/artist/2rISuqj ... lAIH-qg6ig
Youtube: https://www.youtube.com/channel/UCNsrO1 ... W9GF-GgQFA
Bandcamp: https://sawzer.bandcamp.com/
Soundcloud: https://soundcloud.com/sawzer
Spotify: https://open.spotify.com/artist/2rISuqj ... lAIH-qg6ig
Youtube: https://www.youtube.com/channel/UCNsrO1 ... W9GF-GgQFA
Re: Effects for SUNVOX 2.0
Harmonic Boost is a filter effect that is meant to boost the volume of a specific harmonic. It has a parameter called "Base Frequency", which is intended to be modulated by a pitch2ctl module*. The parameter called "Harmonic" was intended to be a direct multiplier of the "Base Frequency" parameter value, but the Amplifier module Gain parameter doesn't seem to do integer multiplication
*Or you could just set it, or modulate in pattern editor
*Or you could just set it, or modulate in pattern editor
- Attachments
-
- SawZer Harmonic Boost.sunsynth
- (7.45 KiB) Downloaded 149 times
You can find me on
Bandcamp: https://sawzer.bandcamp.com/
Soundcloud: https://soundcloud.com/sawzer
Spotify: https://open.spotify.com/artist/2rISuqj ... lAIH-qg6ig
Youtube: https://www.youtube.com/channel/UCNsrO1 ... W9GF-GgQFA
Bandcamp: https://sawzer.bandcamp.com/
Soundcloud: https://soundcloud.com/sawzer
Spotify: https://open.spotify.com/artist/2rISuqj ... lAIH-qg6ig
Youtube: https://www.youtube.com/channel/UCNsrO1 ... W9GF-GgQFA