Page 1 of 2

Synths for SUNVOX 1.9.5

Posted: Sun Jul 29, 2018 1:01 pm
by NightRadio
If you want to see your own modules (synths) in the new SunVox - please upload the files in this thread (attach it to the message, or provide the links). The most beautiful and original modules will be included in the release.
By uploading you agree that your modules can be used freely (without any restrictions, including commercial works) by any user of the SunVox.

Requirements
  • Optimize your modules! (if possible)
  • Pure synths (without samples) are recommended.
  • Don't use registered trademarks in names.
  • File name format: [ one word for the author nickname ] [ space ] [ synth name ].sunsynth
    Examples:
    NR Super Generator.sunsynth
    cube48 Deep Bass.sunsynth
    KidLoFi Some Synth.sunsynth
Thank you!

Re: Synths for the new SUNVOX 1.9.5

Posted: Tue Jul 31, 2018 4:52 am
by Saltbearer
A couple months ago, I was messing with a delay-based string sound and got something pretty neat. F2 and g3 are a bit touchy though.
So_ingMachine das perty stringy.sunsynth
(14.81 KiB) Downloaded 470 times
Example inside, sounds like this - except for the random panning. It was lifted from the project and I'm too lazy to re-export. :V

I just played with it a bit, added filters and drawn splines and stuff. So here's a softer-sounding alternate:
So_ingMachine das still perty stringy.sunsynth
(15.41 KiB) Downloaded 377 times
Example inside, sounds like this.

Re: Synths for the new SUNVOX 1.9.5

Posted: Mon Sep 10, 2018 7:57 pm
by Logickin λ
I used this module for quite a long time (Though I don't post anything until recently).
Vox 303, the Sunvox version of Tb 303.

Story:
I saw the video about using analog generator to create 303 sound using Sunvox, I really like it since this kind of sound is often used in one of my favorite genre, Goa trance; however, I am wondering, is there a way to create the 303 sound easier, simple as plug and play? Then this module is created. Nothing really ground-breaking, but this would have a little more stuff to create the 303 bass easier, in theory.

Features:
TB 303 like synth, with additional stuff:
- Instead of saw and square only, there is a controller to mix both of the sound with different ratio.
- When set the waveform in between, you can change or randomize the phase of the square wave to get a richer sound.
- Distortion (Not really special as just some features from distortion module)
- Able to disable the filter envelope by holding the previous note and play the current one.

The following are the module and example.
The Vox 303 module:
Logickin Vox 303 Mk2.sunsynth
(11.03 KiB) Downloaded 438 times
Demo [finally], still a little rough, but enough for showing the function of the module:
Vox 303 Demo 2.zip
(8.47 KiB) Downloaded 103 times

PS: I guess I will upload more examples that sound more like the classic 303 bass line in future.

Re: Synths for the new SUNVOX 1.9.5

Posted: Wed Jan 09, 2019 12:20 pm
by E8_Heterotic
I already made a thread on it, but I guess I can put my complex oscillator module here. I added controls to the modulator's filter and maxed out the number of custom controllers so you have to spend as little time in edit mode as possible. This is revision 3, I guess.

E8 Complex Oscillator.sunsynth
(13.88 KiB) Downloaded 239 times

Re: Synths for the new SUNVOX 1.9.5

Posted: Fri Apr 12, 2019 7:02 pm
by Ricciardo
I love to design ambient sounds, specialy with sampling or re-synthesis...

this 3 examples use the same principle and structure with some minor tweaks.

Re: Synths for the new SUNVOX 1.9.5

Posted: Mon Apr 22, 2019 12:03 am
by Trackerbound
Here are some modules.

TB Blizzard - a generative blizzard FX. it's quite cold out there
TB DTMF - a generative emulation of DTMF signals. (https://en.wikipedia.org/wiki/Dual-tone ... _signaling)
TB donk bass 2 - Donk Bass 2: the return of Cyka Blyat - an update to the first donk bass. Sounds less wet, yet awesome.

Re: Synths for the new SUNVOX 1.9.5

Posted: Mon Apr 22, 2019 12:07 am
by Trackerbound
More modules:

TB Hardstyle Kick - a hardstyle kick. No comments.

Re: Synths for the new SUNVOX 1.9.5

Posted: Tue Apr 30, 2019 3:30 pm
by Серый MLGamer
О, здарова, Александр!
Я сделал просто офигенный, звонкий и мощный драмсет! Он закреплён в этом сообщении в виде ZIP-архива. Ну, ты там, в общем, распакуешь этот архив, вытащишь оттуда синты и распределишь их по папочкам.
Эх, жалко, что свою папку нельзя к тебе прислать, в которой все мои синты расположены более менее упорядоченно. Или можно? Ну, в общем, пофиг. Просто прими мои синты.

Re: Synths for the new SUNVOX 1.9.5

Posted: Fri May 03, 2019 8:09 pm
by SYBERIA
Another take at trying to make a supersaw.

Re: Synths for the new SUNVOX 1.9.5

Posted: Wed Jul 03, 2019 3:45 pm
by Серый MLGamer
Привет всем!

Я тут пришёл с довольно интересным синтом. Короче, это типа такой трешовый звук типа "Triggered" (ну, вы поняли). Звук этот нужен, чтоб прикольно было. )))

В общем, звук закреплён в этом послании. Качайте и прикалывайтесь. ))) :ROFL:

Re: Synths for the new SUNVOX 1.9.5

Posted: Thu Jul 25, 2019 5:06 pm
by Серый MLGamer
Наконец-то я сделал новую версию своего драмсета, а именно
MLG драмсет v2.1! :Yahoo!:

Список изменений:
1. MLG kick:
1.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony (1-4 channels)").
1.2. Добавлена реверберация щелчка и соответствующие настройки ("Noisy click reverb volume", "Noisy click reverb feedback").
1.3. Добавлены настройки "Body waveform" и "Body power".
2. MLG snare:
2.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony (1-4 channels)").
2.2. Единица измерения в настройке "Body tone" изменилась с "Гц" на "полутон/10" из-за замены модуля "SpectraVoice" на "Generator" под управлением модуля "Glide".
2.3. Добавлена настройка "Body waveform".
2.4. Сделана LFO-панорама модуля "Generator", чтобы звук был похож на звук модуля "SpectraVoice". В результате появились настройки "Body LFO panning amplitude", "Body LFO panning waveform", "Body LFO panning frequency", "Body LFO panning frequency unit" (настройка забагованная, нужно при изменении переиначить настройку "Body LFO panning frequency").
2.5. Добавлена реверберация на шум барабана и соответствующие настройки ("Noise reverb volume", "Noise reverb feedback").
2.6. Добавлены настройки "Kicker waveform" и "Kicker power".
3. MLG close hat, MLG medium hat, MLG open hat, MLG extra-open hat:
3.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony").
3.2. Убраны настройки "FM m. volume", "FM c. frequrency", "FM m. frequency", "FM m. feedback" и "Filter type", чтобы вы не испортили звук. Ну, мало ли, что?
3.3. Настройки "Filter frequency" и "Filter resonance" переименованы на "High filter frequency" и "High filter resonance".
4. MLG crash:
4.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony").
4.2. Убраны настройки "M. volume", "C. frequrency", "M. frequency" и "M. feedback", чтобы вы не испортили звук. Ну, мало ли, что?

Качайте MLG драмсет v2.1 и создавайте классные треки!
|
MLG drumset v2.1 (for including in SunVox).zip
(10.53 KiB) Downloaded 52 times
Это нужно ложить в новую версию SunVox'а.

MLG drumset v2.1.zip
А это полная версия моего драмсета. Пока не вышла новая версия SunVox'а, качайте это.

Спасибо!

Re: Synths for the new SUNVOX 1.9.5

Posted: Mon Oct 07, 2019 1:01 pm
by Logickin λ
I know I made a post about the arpeggiator day ago, seems it might be a good idea to share for everyone, so I decided to post the module on here.
The mechanism, tutorial, and any updates can be found in here:
https://warmplace.ru/forum/viewtopic.ph ... 352#p17351

In short, the module can do:
Synth Edition:
- Classic arpeggios by pressing a chord
- Supports up to 8 notes in total
- Supports velocity for individual notes
- Supports pattern effects for individual notes
- Envelope Generator for controlling the length of the notes

Midiout Edition
- Supports up to 8 notes in total
- Supports pattern effects for individual notes
- Supports any sunsynth modules
- Portamento effect
(cannot control velocity though)

Logickin Classic Arpeggiator v1.1.zip
(7.08 KiB) Downloaded 43 times
Logickin Classic Arpeggiator Midi Out.zip
(7.15 KiB) Downloaded 22 times
EDIT: Midi out edition also been uploaded, the modules are renamed to matching the name requirement.

Re: Synths for the new SUNVOX 1.9.5

Posted: Sat Oct 26, 2019 5:24 am
by Keres
This is a Rock/Dance kit. trying to keep it low CPU. the bass drum and snare are more configurable, and there is an envelope following distortion with mix options for each drum and you use the module's tempo settings to vary it. the Cymbal hit resets the LFO on the effect. Have Fun!

Re: Synths for the new SUNVOX 1.9.5

Posted: Sat Oct 26, 2019 5:32 am
by Keres
This is a lazer beam emulator ;) you can use it to zap aliens. careful of the quality setting... you can overheat the barrel and melt down the mini-reactor!

Re: Synths for the new SUNVOX 1.9.5

Posted: Thu Nov 07, 2019 5:38 am
by Keres
bass synths i made a while back.