Synths for SUNVOX 1.9.5

User avatar
NightRadio
Site Admin
Posts: 3262
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Synths for SUNVOX 1.9.5

Post by NightRadio » Sun Jul 29, 2018 1:01 pm

If you want to see your own modules (synths) in the new SunVox - please upload the files in this thread (attach it to the message, or provide the links). The most beautiful and original modules will be included in the release.
By uploading you agree that your modules can be used freely (without any restrictions, including commercial works) by any user of the SunVox.

Requirements
  • Optimize your modules! (if possible)
  • Pure synths (without samples) are recommended.
  • Don't use registered trademarks in names.
  • File name format: [ one word for the author nickname ] [ space ] [ synth name ].sunsynth
    Examples:
    NR Super Generator.sunsynth
    cube48 Deep Bass.sunsynth
    KidLoFi Some Synth.sunsynth
Thank you!

User avatar
Saltbearer
Posts: 99
Joined: Thu Sep 04, 2014 2:18 am
Location: Caflirinoa
Contact:

Re: Synths for the new SUNVOX 1.9.5

Post by Saltbearer » Tue Jul 31, 2018 4:52 am

A couple months ago, I was messing with a delay-based string sound and got something pretty neat. F2 and g3 are a bit touchy though.
So_ingMachine das perty stringy.sunsynth
(14.81 KiB) Downloaded 469 times
Example inside, sounds like this - except for the random panning. It was lifted from the project and I'm too lazy to re-export. :V

I just played with it a bit, added filters and drawn splines and stuff. So here's a softer-sounding alternate:
So_ingMachine das still perty stringy.sunsynth
(15.41 KiB) Downloaded 375 times
Example inside, sounds like this.

User avatar
Logickin λ
Posts: 30
Joined: Sat Sep 08, 2018 8:31 pm

Re: Synths for the new SUNVOX 1.9.5

Post by Logickin λ » Mon Sep 10, 2018 7:57 pm

I used this module for quite a long time (Though I don't post anything until recently).
Vox 303, the Sunvox version of Tb 303.

Story:
I saw the video about using analog generator to create 303 sound using Sunvox, I really like it since this kind of sound is often used in one of my favorite genre, Goa trance; however, I am wondering, is there a way to create the 303 sound easier, simple as plug and play? Then this module is created. Nothing really ground-breaking, but this would have a little more stuff to create the 303 bass easier, in theory.

Features:
TB 303 like synth, with additional stuff:
- Instead of saw and square only, there is a controller to mix both of the sound with different ratio.
- When set the waveform in between, you can change or randomize the phase of the square wave to get a richer sound.
- Distortion (Not really special as just some features from distortion module)
- Able to disable the filter envelope by holding the previous note and play the current one.

The following are the module and example.
The Vox 303 module:
Logickin Vox 303 Mk2.sunsynth
(11.03 KiB) Downloaded 437 times
Demo [finally], still a little rough, but enough for showing the function of the module:
Vox 303 Demo 2.zip
(8.47 KiB) Downloaded 103 times

PS: I guess I will upload more examples that sound more like the classic 303 bass line in future.
Last edited by Logickin λ on Fri Feb 22, 2019 7:37 am, edited 1 time in total.
Yes, that little bird head robot in discord is me.

My sound cloud: https://soundcloud.com/logickinlambda
My Audius: https://audius.co/logickinlambda

E8_Heterotic
Posts: 30
Joined: Wed Dec 19, 2018 4:05 am

Re: Synths for the new SUNVOX 1.9.5

Post by E8_Heterotic » Wed Jan 09, 2019 12:20 pm

I already made a thread on it, but I guess I can put my complex oscillator module here. I added controls to the modulator's filter and maxed out the number of custom controllers so you have to spend as little time in edit mode as possible. This is revision 3, I guess.

E8 Complex Oscillator.sunsynth
(13.88 KiB) Downloaded 238 times

Ricciardo
Posts: 4
Joined: Tue Apr 09, 2019 3:04 am

Re: Synths for the new SUNVOX 1.9.5

Post by Ricciardo » Fri Apr 12, 2019 7:02 pm

I love to design ambient sounds, specialy with sampling or re-synthesis...

this 3 examples use the same principle and structure with some minor tweaks.
Attachments
Dark Scale.sunsynth
(38.85 KiB) Downloaded 183 times
Chimmorgan.sunsynth
(21.16 KiB) Downloaded 190 times
A hell of a Nightmare.sunsynth
(30.71 KiB) Downloaded 176 times

User avatar
Trackerbound
Posts: 18
Joined: Sat Jan 13, 2018 12:27 pm

Re: Synths for the new SUNVOX 1.9.5

Post by Trackerbound » Mon Apr 22, 2019 12:03 am

Here are some modules.

TB Blizzard - a generative blizzard FX. it's quite cold out there
TB DTMF - a generative emulation of DTMF signals. (https://en.wikipedia.org/wiki/Dual-tone ... _signaling)
TB donk bass 2 - Donk Bass 2: the return of Cyka Blyat - an update to the first donk bass. Sounds less wet, yet awesome.
Attachments
TB donk bass 2.sunsynth
(13.73 KiB) Downloaded 147 times
TB DTMF.sunsynth
(27.69 KiB) Downloaded 129 times
TB Blizzard.sunsynth
(6.98 KiB) Downloaded 155 times

User avatar
Trackerbound
Posts: 18
Joined: Sat Jan 13, 2018 12:27 pm

Re: Synths for the new SUNVOX 1.9.5

Post by Trackerbound » Mon Apr 22, 2019 12:07 am

More modules:

TB Hardstyle Kick - a hardstyle kick. No comments.
Attachments
TB Hardstyle Kick.sunsynth
(15.61 KiB) Downloaded 152 times

User avatar
Серый MLGamer
Posts: 7
Joined: Mon Apr 15, 2019 6:33 pm
Contact:

Re: Synths for the new SUNVOX 1.9.5

Post by Серый MLGamer » Tue Apr 30, 2019 3:30 pm

О, здарова, Александр!
Я сделал просто офигенный, звонкий и мощный драмсет! Он закреплён в этом сообщении в виде ZIP-архива. Ну, ты там, в общем, распакуешь этот архив, вытащишь оттуда синты и распределишь их по папочкам.
Эх, жалко, что свою папку нельзя к тебе прислать, в которой все мои синты расположены более менее упорядоченно. Или можно? Ну, в общем, пофиг. Просто прими мои синты.
Attachments
MLG drumset v2.0.zip
(8.52 KiB) Downloaded 97 times

SYBERIA
Posts: 6
Joined: Mon Jan 08, 2018 8:23 pm

Re: Synths for the new SUNVOX 1.9.5

Post by SYBERIA » Fri May 03, 2019 8:09 pm

Another take at trying to make a supersaw.
Attachments
CB-1000.sunsynth
(13.93 KiB) Downloaded 144 times

User avatar
Серый MLGamer
Posts: 7
Joined: Mon Apr 15, 2019 6:33 pm
Contact:

Re: Synths for the new SUNVOX 1.9.5

Post by Серый MLGamer » Wed Jul 03, 2019 3:45 pm

Привет всем!

Я тут пришёл с довольно интересным синтом. Короче, это типа такой трешовый звук типа "Triggered" (ну, вы поняли). Звук этот нужен, чтоб прикольно было. )))

В общем, звук закреплён в этом послании. Качайте и прикалывайтесь. ))) :ROFL:
Attachments
Seriy_MLGamer trash sound.sunsynth
Сань, добавь это в раздел "bass".
(3.57 KiB) Downloaded 51 times

User avatar
Серый MLGamer
Posts: 7
Joined: Mon Apr 15, 2019 6:33 pm
Contact:

Re: Synths for the new SUNVOX 1.9.5

Post by Серый MLGamer » Thu Jul 25, 2019 5:06 pm

Наконец-то я сделал новую версию своего драмсета, а именно
MLG драмсет v2.1! :Yahoo!:

Список изменений:
1. MLG kick:
1.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony (1-4 channels)").
1.2. Добавлена реверберация щелчка и соответствующие настройки ("Noisy click reverb volume", "Noisy click reverb feedback").
1.3. Добавлены настройки "Body waveform" и "Body power".
2. MLG snare:
2.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony (1-4 channels)").
2.2. Единица измерения в настройке "Body tone" изменилась с "Гц" на "полутон/10" из-за замены модуля "SpectraVoice" на "Generator" под управлением модуля "Glide".
2.3. Добавлена настройка "Body waveform".
2.4. Сделана LFO-панорама модуля "Generator", чтобы звук был похож на звук модуля "SpectraVoice". В результате появились настройки "Body LFO panning amplitude", "Body LFO panning waveform", "Body LFO panning frequency", "Body LFO panning frequency unit" (настройка забагованная, нужно при изменении переиначить настройку "Body LFO panning frequency").
2.5. Добавлена реверберация на шум барабана и соответствующие настройки ("Noise reverb volume", "Noise reverb feedback").
2.6. Добавлены настройки "Kicker waveform" и "Kicker power".
3. MLG close hat, MLG medium hat, MLG open hat, MLG extra-open hat:
3.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony").
3.2. Убраны настройки "FM m. volume", "FM c. frequrency", "FM m. frequency", "FM m. feedback" и "Filter type", чтобы вы не испортили звук. Ну, мало ли, что?
3.3. Настройки "Filter frequency" и "Filter resonance" переименованы на "High filter frequency" и "High filter resonance".
4. MLG crash:
4.1. Добавлены настройки панорамы и полифонии ("Panning" и "Polyphony").
4.2. Убраны настройки "M. volume", "C. frequrency", "M. frequency" и "M. feedback", чтобы вы не испортили звук. Ну, мало ли, что?

Качайте MLG драмсет v2.1 и создавайте классные треки!
|
MLG drumset v2.1 (for including in SunVox).zip
(10.53 KiB) Downloaded 51 times
Это нужно ложить в новую версию SunVox'а.

MLG drumset v2.1.zip
А это полная версия моего драмсета. Пока не вышла новая версия SunVox'а, качайте это.

Спасибо!

User avatar
Logickin λ
Posts: 30
Joined: Sat Sep 08, 2018 8:31 pm

Re: Synths for the new SUNVOX 1.9.5

Post by Logickin λ » Mon Oct 07, 2019 1:01 pm

I know I made a post about the arpeggiator day ago, seems it might be a good idea to share for everyone, so I decided to post the module on here.
The mechanism, tutorial, and any updates can be found in here:
https://warmplace.ru/forum/viewtopic.ph ... 352#p17351

In short, the module can do:
Synth Edition:
- Classic arpeggios by pressing a chord
- Supports up to 8 notes in total
- Supports velocity for individual notes
- Supports pattern effects for individual notes
- Envelope Generator for controlling the length of the notes

Midiout Edition
- Supports up to 8 notes in total
- Supports pattern effects for individual notes
- Supports any sunsynth modules
- Portamento effect
(cannot control velocity though)

Logickin Classic Arpeggiator v1.1.zip
(7.08 KiB) Downloaded 42 times
Logickin Classic Arpeggiator Midi Out.zip
(7.15 KiB) Downloaded 21 times
EDIT: Midi out edition also been uploaded, the modules are renamed to matching the name requirement.
Yes, that little bird head robot in discord is me.

My sound cloud: https://soundcloud.com/logickinlambda
My Audius: https://audius.co/logickinlambda

User avatar
Keres
Posts: 229
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: Synths for the new SUNVOX 1.9.5

Post by Keres » Sat Oct 26, 2019 5:24 am

This is a Rock/Dance kit. trying to keep it low CPU. the bass drum and snare are more configurable, and there is an envelope following distortion with mix options for each drum and you use the module's tempo settings to vary it. the Cymbal hit resets the LFO on the effect. Have Fun!
Attachments
Keres_OrangeKit.sunsynth.zip
(7.38 KiB) Downloaded 27 times

User avatar
Keres
Posts: 229
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: Synths for the new SUNVOX 1.9.5

Post by Keres » Sat Oct 26, 2019 5:32 am

This is a lazer beam emulator ;) you can use it to zap aliens. careful of the quality setting... you can overheat the barrel and melt down the mini-reactor!
Attachments
Keres_LazerBeam.sunsynth
(15.55 KiB) Downloaded 30 times

User avatar
Keres
Posts: 229
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: Synths for the new SUNVOX 1.9.5

Post by Keres » Thu Nov 07, 2019 5:38 am

bass synths i made a while back.
Attachments
Keres_SupRight.sunsynth
(10.7 KiB) Downloaded 26 times
Keres_BassMunch.sunsynth
(23.57 KiB) Downloaded 30 times

Locked