I'm pretty new to sunvox, and I wanted to try to use the meta module just to get a tiny hand on all the possibilities it gives.
I ended up making a nice super saw I wanted to share with you.
Pitch, Panning and Volume are MultiCtl that allows changes to what they're named after.
When selected, the meta module gives you access to 3 controller. I describe them here because I couldn't name these controller so that it's easy to recognize them, since they all are the "value" controller of the multiCtl.
1: Volume. Don't mess with it too much because it can get very loud very quickly
2: This is the Value controller of the Pitch multyCtl. When the value is set at max, every saw has the same pitch. As the value lessen, each saw's pitch drift away from the original pitch to it's own rate: I wanted each saw to have a different pitch, so I made linear variations in the min/max settings of each saw to make each pitch different.
3: Panning. I did pretty much the same thing as above, as I didn't want two saw to have the same panning value.
here's the download link. Feel free to tell me what you think, as well as what you think would make it better !
https://ufile.io/1i2yz
