Use sunvox as a midi controller keyboard

Post Reply
blacbeard
Posts: 69
Joined: Fri May 28, 2010 10:13 am

Use sunvox as a midi controller keyboard

Post by blacbeard » Wed Oct 01, 2014 1:02 am

Don't have a midi controller? No problems, use Sunvox!

1. Install loopbe1, Jack or midiyoke virtual midi port. Only need to install one of them, loopbe1 is what I use.
2. Open your other traditional sequencer and select your chosen virtual midi program as your midi input.
3. Open sunvox
4. Create multisynth and double click to bring up properties box. Multisynth doesn't need to be connected to output.
5. Select loopbe1 internal midi as midi out. Close dialog
6. You can navigate your other sequencer normally, but now if you raise sunvox from the task bar and play the qwerty keyboard notes on the multisynth, you can play note data into your sequencer and VST instruments that you have selected.
7. When you no longer need to enter notes, raise your sequencer to the front on your desktop and operate and edit normally.

UNLO
Posts: 6
Joined: Thu Dec 25, 2014 9:27 pm

Re: Use sunvox as a midi controller keyboard

Post by UNLO » Thu Dec 25, 2014 10:50 pm

im having a hard enough time just trying to get my Akai MPK 49 to send data to SunVOX over USB... this seems way over my head. LOL i'll be lucky if i can get this to work...btw only seems to be an issue on android. works great over windows and linux

lazzarello
Posts: 3
Joined: Thu Dec 24, 2015 10:01 am

Re: Use sunvox as a midi controller keyboard

Post by lazzarello » Wed Jan 06, 2016 11:42 pm

I can follow up. On OS X you can enable the "IAC Driver" in the Audio And MIDI Setup under MIDI Devices. Open that utility, double click on the IAC Driver and check the box labeled "Device is online".

Then you will have this driver as an option to connect running applications via MIDI. My setup at the moment is Sunvox, Pure Data and NI Massive softsynth. All three speak over MIDI.

Post Reply