When using pattern commands to switch metamodule input modules, the metamodule goes silent or does weird things as the pattern command "change input module" is passed. Has anyone encountered this?
I had a bunch of square wave generator modules at different duty cycles and wanted to switch between them to get more varied timbres for the metamodule instrument.
If I press a keyboard key, change the input module number manually, then press a keyboard key again, it works perfectly. The sound is different. But when I cange by pattern command instead of manually it doesnt work.
using pattern command to switch metamodule input module
Re: using pattern command to switch metamodule input module
Sorry, i can't help with the input switch problem...but you could use a noise generator and a sound2ctl module to randomize the duty cycle if you just need some randomness.
- NightRadio
- Site Admin
- Posts: 3955
- Joined: Fri Jan 23, 2004 12:28 am
- Location: Ekaterinburg. Russia
- Contact:
Re: using pattern command to switch metamodule input module
Please show me your projectWhen using pattern commands to switch metamodule input modules, the metamodule goes silent or does weird things as the pattern command "change input module" is passed. Has anyone encountered this?
Re: using pattern command to switch metamodule input module
when I switch input modules by metamodule pattern command unexpected things happen.
sometimes the wrong input module will sound, sometimes other wierd stuff happens.
- NightRadio
- Site Admin
- Posts: 3955
- Joined: Fri Jan 23, 2004 12:28 am
- Location: Ekaterinburg. Russia
- Contact:
Re: using pattern command to switch metamodule input module
It is because the note command will be processed first, before the controller change in your case. SunVox reads the commands sequentially from left to right, top to bottom.
So it first reads the note, then the velocity, then the controller commands.
See the example
So it first reads the note, then the velocity, then the controller commands.
See the example
- Attachments
-
- metaswitchexample2.sunvox
- fixed version
- (4.54 KiB) Downloaded 352 times
Re: using pattern command to switch metamodule input module
awesome, thanks! If i want to use pattern command to switch metamodule input modules I'll just put that command in the line before the note is triggered or at the the start of the pattern.
Re: using pattern command to switch metamodule input module
Thanks for the example. I get it now, commands to the left.