Overview:
Putting a Glide module inside of a MetaModule, and turning on the option "Reset on 1st note" makes the Glide never glide.
Steps:
1. Open SunVox to an empty project.
2. Load in a MetaModule.
3. Edit the metamodule to add this chain:
[01] Glide -> [02] (Analog) Generator -> [00] Output
4. Return to the project, and add some notes to the pattern editor.
5. Play it, the notes should glide to each other.
6. Go back into the MetaModule, and turn on "Reset on 1st note".
7. Go back and play the pattern again. It stops gliding at all, even for continuous notes (no NOTE OFF).
Expected behavior:
Step 7 should have resulted in gliding notes if they were continuous.
Example:
Glide doesn't work in MetaModule when "Reset on 1st note" is turned on
-
- Posts: 4
- Joined: Sun Oct 07, 2012 5:17 am
- NightRadio
- Site Admin
- Posts: 3955
- Joined: Fri Jan 23, 2004 12:28 am
- Location: Ekaterinburg. Russia
- Contact:
Re: Glide doesn't work in MetaModule when "Reset on 1st note" is turned on
Actually there are no continuous notes in your project, and this is the main reason why the Glide never glide :)It stops gliding at all, even for continuous notes (no NOTE OFF).
In the following pattern we see the single NOTE OFF command:
Code: Select all
D5 01
G5 01
A5 01
==
1) use "Slide to note" effect 03 with some big XXYY (e.g. 1000):
Code: Select all
D5 01
G5 01 0003 1000
A5 01 0003 1000
3) disable "Polyphony" of the Glide module and play the following pattern:
Code: Select all
D5 01 .... .... |
.... .... | G5 01 .... ....
.... .... | A5 01 .... ....
== .... .... | == .... ....
-
- Posts: 4
- Joined: Sun Oct 07, 2012 5:17 am
Re: Glide doesn't work in MetaModule when "Reset on 1st note" is turned on
Thanks for the reponse! I wasn't aware of this behavior...