I had 22 metamodules set up (one for each individual hit of the amen break), each one had [sampler -> amplifier ->filter pro -> amplifier-> out].
Some of the metamodules would not trigger the samples I had set up, others would.
I checked all the routing and it was correct. I think it may be a small bug.
metamodule bug
- NightRadio
- Site Admin
- Posts: 3955
- Joined: Fri Jan 23, 2004 12:28 am
- Location: Ekaterinburg. Russia
- Contact:
Re: metamodule bug
Is it fully reproducible? Please send your project here
Re: metamodule bug
I experience the same thing. I am using analog generators inside of metamodules instead of samples. If you disconnect metamodule 1 from metamodule 8, and then change the pattern on track 4 to trigger module 8 instead of 1, then it plays like it should. I have tried tuning all the relative pitches to make sure there is no overlap, but no luck.
- Attachments
-
- basic.sunsynth
- (923 Bytes) Downloaded 378 times
- NightRadio
- Site Admin
- Posts: 3955
- Joined: Fri Jan 23, 2004 12:28 am
- Location: Ekaterinburg. Russia
- Contact:
Re: metamodule bug
Example project please
Re: metamodule bug
well here is an example project. both patterns should play the same, but they don't... you can hear the bassline get cut out when trying to use the main multisynth.
- Attachments
-
- This should work 2017-03-01 17-21.sunvox
- (23.63 KiB) Downloaded 357 times
- NightRadio
- Site Admin
- Posts: 3955
- Joined: Fri Jan 23, 2004 12:28 am
- Location: Ekaterinburg. Russia
- Contact:
Re: metamodule bug
The answer is the same as in this post: viewtopic.php?f=20&t=4294&p=14872#p14872both patterns should play the same, but they don't... you can hear the bassline get cut out when trying to use the main multisynth.
Please use the "Ignore notes with zero velocity" option in MultiSynth